Reviews

I conducted a comprehensive inspection and repair of a Coleman furnace to ensure peak performance. The inspection involved a meticulous examination of all components, including burners, heat exchanger, and control systems. I cleaned the burners to eliminate debris and checked the heat exchanger for cracks or corrosion. The control systems were tested for accurate temperature regulation. Following the inspection, I replaced any worn-out parts, lubricated moving components, and adjusted settings as needed. I completed a pre-season heating inspection, testing the ignition system, checking airflow, and clearing venting obstructions. After starting the furnace, I verified proper operation and listened for any unusual noises, ensuring it ran smoothly for the heating season.

Performing a annual maintenance on a Navien Tankless water heater.

Cleared clogged kitchen sink. Changed 75 gallon AO Smith water heater.

Replaced failed sump pump

Sewer inspection with sewer camera. Installed 40 gallon Bradford White water heater.

Cleaned indoor blower wheel on carrier unit to improve airflow

I began by assessing the damaged sprinkler water line, identifying the exact point of breakage. Using specialized tools, I carefully excavated the area around the broken section to expose the full extent of the damage. After shutting off the water supply, I removed the damaged segment of the line. Next, I measured and cut a new section of pipe to replace the broken part, ensuring a precise fit. I then connected the new pipe segment using appropriate fittings and secured it with pipe clamps. Following this, I tested the connection for leaks and ensured the water flow was restored.

I began by carefully inspecting the existing plumbing setup to ensure compatibility with the Flo By Moen smart valve. After confirming the system's readiness, I turned off the water supply to prevent any leaks or accidents during installation. I then removed the old valve, taking care to preserve the integrity of the surrounding pipes. Next, I installed the new Flo By Moen smart valve, ensuring all connections were secure and leak-proof. I calibrated the valve settings to match the homeowner's preferences for water flow and temperature. Following this, I turned the water supply back on and tested the valve to confirm it operated smoothly and efficiently. Finally, I provided the homeowner with a brief overview of the smart valve's features and how to use them effectively.

Upon arrival, I assessed the shower drain, identifying a significant blockage. Using specialized tools, I carefully removed the drain cover. I employed a drain auger to navigate through the pipe, breaking up and extracting the obstruction. After ensuring the clog was fully cleared, I flushed the drain with water to confirm smooth flow. I then reassembled the drain cover, ensuring it was secure. The shower drain now functions efficiently, providing a clear and unobstructed water flow. Throughout the process, I maintained a clean and professional workspace, ensuring no damage to fixtures or surfaces.

I installed a state-of-the-art Express Water Filtration system, ensuring optimal water quality. The process began with a thorough assessment of the existing plumbing to determine the best placement for the filtration unit. I then carefully removed the old system, if present, and installed the new unit, connecting it to the main water supply. I calibrated the system to ensure it was functioning correctly and tested the water quality to confirm the filtration was effective. Finally, I provided detailed instructions on maintaining and operating the new system, ensuring the client could use it confidently. The installation was completed efficiently, with minimal disruption, and the water quality improved significantly.